Fresno County · Highways 180 and 145
Sealcoating in Kerman —
cheap insurance for asphalt.
Looking for sealcoating in Kerman? Here’s the honest version: we’re one established Fresno shop (paving the Valley since 1990), and Kerman is about 20 minutes west. No frills, no franchise, the same crews that have been doing this for decades.
Kerman sits fifteen miles west of Fresno on Highway 180, in the heart of Fresno County's agricultural west side. Vineyards, almonds, raisins, and the small commercial strip that supports the farms make up most of what we see here — residential driveways, parking lots for the local businesses, and the occasional ag-property road.
Same-week scheduling is the default for Kerman jobs. The drive is short enough that we can fit estimate visits in alongside other west-side work.
Kerman sits in Fresno County; dairy and row-crop country — long gravel-to-asphalt approaches, equipment yards that need real base depth, and in-town residential work. Highways 180 and 145 keep the trip simple, and grouped scheduling keeps small jobs affordable out here.
Sealcoat in Kerman
What sealcoating does here.
Watch any Valley parking lot go from black to gray and you’re watching the binder burn out of it. The sun does more damage here than the traffic does — oxidized asphalt turns brittle, cracks sooner, and unravels at the surface. Sealcoating is the scheduled defense: a wear layer that takes the UV so the asphalt underneath doesn’t have to, applied on a cycle that costs pennies against what repaving costs.
How the work goes down.
A real sealcoat job is mostly preparation. We clean the surface, prime the oil spots, treat the cracks with hot rubberized sealant, and only then put down two coats of commercial-grade sealer. Lots get done in phases around your business hours; stripes go back on after cure. Skip any of those steps and the seal peels early — so we don’t.
Why this shop
One shop, since 1990.
One shop, family-run, since 1990. No commissioned salesmen, no phone-center quotes for Kerman properties — the person who measures your job is the person who answers for it. CSLB C-32 #760658, verifiable in two clicks.
Free estimates in Kerman: (559) 442-4105. If the crew’s on a job, leave a message — same-day callbacks are the norm.
Sealcoat questions
Asked before every
Kerman job.
How often should asphalt be sealcoated here?
In the Valley: 2–3 years for commercial lots, 3–5 for residential driveways. The sun here is harder on asphalt than the traffic is.
Can you sealcoat over cracks?
Sealer isn't a crack filler — cracks get hot-applied filler first, then the sealcoat goes over the whole surface. Sealing over open cracks just paints the problem.
How soon can you get to Kerman?
Kerman runs on the same lead time as Fresno proper — it’s about 20 minutes west. Estimates usually happen within a couple of days, and same-week starts are normal once you sign off.