Kings County · Highway 43
Paving in Corcoran —
built for Valley heat.
Plenty of paving websites claim Corcoran. Here’s our claim, plainly: one shop, Fresno-based, CSLB C-32 #760658, serving Corcoran from the Fresno yard — about an hour south. Estimates are free and the schedule is honest.
Corcoran sits south of Hanford on Highway 43, a Kings County town built on cotton agriculture and the state prison economy. A mix of residential paving and small commercial work make up most of the jobs we see here.
Corcoran is at the far reach of our Kings County route — we group jobs with Hanford and Lemoore work to make the trip from Fresno worthwhile.
Corcoran is deep Kings County farm country — cotton, tomatoes, dairies, and the long, dead-straight county roads that serve them. Gin yards and equipment lots out here get specced for loaded harvest trucks, not sedans, and that changes everything from base depth to turning-radius wear.
What we see in Corcoran: Kings County cotton-and-dairy country — gin yards, dairy approaches and long rural driveways. The route out is Highway 43 — a run our crews have made more times than anyone’s counted.
Paving in Corcoran
What the job includes.
Most paving that fails early around here fails from underneath. Clay that swells with every irrigation cycle, a skimped base, water with nowhere to go — the blacktop on top never had a chance. So when you hire us for a driveway, a lot, or a private road, you’re mostly hiring what we do to the ground first. Grading, base rock at a depth that matches your traffic, compaction in lifts — then, and only then, hot mix.
How we run a paving job.
Expect a plain-spoken visit: we walk the site, measure it, poke at the soft spots, and give you a written number with the section spec on it — base depth, mat thickness, drainage. If your old surface can carry an overlay we’ll offer that as the cheaper path; if it can’t, we’ll show you why rather than sell you two more years.
Why this shop
Nothing subcontracted. Ever.
Everything stays in-house — our crew, our equipment, our materials counter (we’re an authorized Crafco distributor). Nothing on a Corcoran job gets subcontracted, which is why the quote you approve is the crew that shows up.
One call starts it: (559) 442-4105. Photos of the surface help; the site walk settles it.
Paving questions
Asked before every
Corcoran job.
How long before we can drive on it?
Stay off new asphalt 24–72 hours depending on heat — and in Fresno summers, longer is better. Asphalt cures over months, so avoid sharp steering turns in one spot for the first few weeks.
Does the summer heat affect paving?
It helps and it hurts. Hot mix stays workable longer in a Fresno summer, which is good for compaction — but subgrade prep matters more because the same heat bakes expansive clay hard and the winter rain swells it back. The section has to be built for both seasons.
Do you really cover Corcoran?
Corcoran is about an hour south, and we group jobs out that way into efficient runs. An estimate visit is typically scheduled within the week, and grouped routing keeps mobilization off your bill.